A ConocoPhillips Lubricants brand, Phillips 66 serves automotive, aviation, agriculture, construction, snowmobile, and motorcycle, marine and industrial segments. The brand’s product line offers premium engine oils and greases, air and oil filters, antifreeze and coolants.
Injex 2-Cycle Oil
Product Line Selection
Can be mixed to a 100:1 Fuel/Oil Ratio. Contains a totally ashless additive package. May be used in most applications which call for TC-W/BIA, TC-WII or regular Outboard Motor Oil. Exceeds TC-W and TC-WII in engine performance.
Application and Description
Premium quality 2-cycle motor oil fully approved by the National Marine Manufacturers Association (NMMA) recertified TC-W3™ service. Meets NMMA (formerly BIA) warranty requirements of all outboard motors of major manufacturers, including highest horsepower units. Recommended for use in all other outboard motors and other small 2-cycle engines (snowmobiles, chain saws, lawn care equipment, certain motorbikes, etc.) requiring TC-W3™. Combination of high VI base oils, totally ashless additives and carefully selected high flash diluent. Dyed PURPLE for easy identification. Will perform equal to or better than any OEM brands. Outperformed a leading OEM reference oil in field testing. Designed especially for use in all types and models of oil injection systems. Use in the same ratio as recommended for the OEM brand. Insistence of an OEM or its representatives requiring the use of private label TC-W3™ oils for warranty purposes may violate a federal law. Contact Phillips 66 technical support section (1-800-766-0050) for further information.
Typical Properties:
Values are representitive of current production
X/C® Aviation Multiviscosity Oils
Proven Performance
X/C 20W-50
X/C 20W-50 provides opposed piston engines improved performance than single grade oils. X/C is an ashless dispersant mineral base oil that can be used during the break-in period and then as an operational oil to TBO. X/C should be used year round to take advantage of all the performance benefits this multiviscosity aviation oil has to offer.
X/C 25W-60
X/C 25W-60 has much to offer the radial engines and other aviation piston engines originally designed to run on heavier grade oils. Pilots and mechanics will notice benefits immediately with 25W-60 over the traditional heavier single grade aviation oils. Benefits such as improved oil flow at start up, quicker warm up time, cooler operating temperatures and a cleaner operating engine. X/C 25W-60 like the 20W-50 should be used year round, during break-in and on to TBO.
Application and Description
Phillips Meets Industry Standards
- Meets FAA requirements
- Meets these engine manufacturers requirements:
- Avco Lycoming Material Specification No. 301G
- Pratt & Whitney Bulletin #1183 “U“
- Teledyne Continental Material Specification MHS-24B
- Passes major aircraft engine manufacturers 150 hour type tests
- Meets military specification MIL-22851-D for additive treatments (X/C and Type A)
- QPL-J1899
- DO7L1 – 50 (Type A)
- DO7L1 – 20W-50 (X/C)
- DO7L1 – 25W-60 (X/C)
Typical Properties:
Values are representitive of current production
Stock Number | 48250 ————— 48260 |
SAE Grade | 20W-50 ———- 25W-60 |
API Gravity | 29.7 ————— 28.7 |
Flash point, COC, C (F) | 245 (473) ———- 260 (500) |
Pour point, C (F) | -34 (-29) ———- -29 (-20) |
Foam Test | Pass ————— Pass |
Neutralization Number | 0.15 ————— 0.15 |
Copper Corrosion | Pass ————— Pass |
cP @ -15 C (cold crank) | 5372———- 8018(-10C) |
cSt @ 40 C | 161 ————— 245 |
cSt @ 100 C | 19.5 ————— 24.3 |
Viscosity Index | 142 ————— 125 |
Color | 2.5 ————— 3.5 |
Ash | Nil ————— Nil |
Aviation Antirust Oil (SAE 20W-50)
Application and Description
- Phillips 66 Antirust oil is used in preserving aircraft engines. Has been used by airframe manufacturers for many years as a “Fly Away Oil“ for new or rebuilt aircraft engines expected to sit idle for extended periods.
- Operational hours should not exceed 25.
- May be used as a “break-in“ oil if desired. We recommend only 10 hours operational time when used this way.
- Approvals: MIL-C-6529C, MIL-L-6082E (Base Oil), SAE J1966
Typical Properties:
Values are representitive of current production
Product Code | 62830 |
SAE Grade | 20W-50 |
API Gravity | 28.9 |
Flash Point, COC, C (F) | 226 (439) |
Pour Point, C (F) | -26 (-15) |
Viscosities | |
cSt @ 40 C (104 F) | 176.6 |
cSt @ 100 C (212 F) | 19.3 |
cp @ -10 C (cold crank) | 3,960 |
Viscosity Index | 125 |
Aviation Piston Engine Oil, Type M (20W-50)
Application and Description
Phillips Meets Industry Standards
Typical Properties:
Values are representitive of current production
Product Code | 48780 |
PI Gravity | 29.7 |
Flash Point, COC, C (F) | 245 (473) |
Pour Point, C (F) | -34 (-29) |
Foam Test | Pass |
Neutralization Number | 0.15 |
Copper Corrosion | Pass |
cP @ -10C (+14F) (cold crank) | 3000 |
cSt @ 40 C | 161 |
cSt @ 100 C | 19.5 |
Viscosity Index | 142 |
Color | 2.5 |
Ash | Nil |
Baltic Oils
Application and Description
Baltics are high quality, severely hydrotreated naphthenic pale oils, which have low carbon residues and low pour points. Because of their low pour points, they are particularly suited for low ambient temperature applications. Recommended for use in industrial refrigeration compressors handling ammonia or carbon dioxide. The use of Baltic in this application has been quite extensive both at the present and past throughout the industry. Baltic Oils are treated with Rust and Oxidation inhibitors to provide superior protection for R&O.
Recommended in the ISO 68 viscosity grade as a "smoke oil" for exhibition flying in all kinds of aircraft.
Typical Properties:
Values are representitive of current production
ISO Grade | 32…………………………68 |
Product Code(s) | 81530…………….81550 |
Appearance | Light Pale……………..– |
Gravity, API | 23.6…………………..21.1 |
Flash, COC F | 320…………………….350 |
Pour Pt., F (max) | -30………………………-21 |
Visc., cSt at 40 C | 32-35…………..62.5-70 |
cSt at 100 C | |
SUS at 100 F | 150-165………..290-325 |
SUS at 210 F | |
Viscosity Index | 40…………………………43 |
Carbon Residue, % | 2.0……………………….3.0 |
Color |
Type A 100AD Piston Engine Aricraft Oil (Grade 50)
Application and Description
Meets FAA requirements
Typical Properties:
Values are representitive of current production
ProductCode | 48270 |
SAEGrade | 50 |
APIGravity | 28.8 |
FlashPoint,COC,C(F) | 260(500) |
FirePoint,C(F) | 285(545) |
PourPoint,C(F) | -30(-22) |
cSt@40C | 200.2 |
cSt@100C | 20 |
ViscosityIndex | 115 |
TraceAsh,% | Nil |
NeutralizationNumber | 0.15 |
FoamTest | Pass |
CopperCorrosion | Pass |
Type A 120AD Piston Engine Aricraft Oil (Grade 60)
Application and Description
- Type A 100AD & 120AD are premium single grade ashless dispersant oils for opposed piston aircraft engines.
- Can be used in aircraft requiring SAE 50 (Commercial Grade 100) or SAE
- 60 (Commercial Grade 120) respectively.
- Same superior additive chemistry used in X/C® Aviation Oil.
- Formulated with an ashless dispersant for cleaner engine operation.
- High quality base oil for superior film strength.
- Premium oil for pilots and rebuilders preferring a single grade oil.
- Provides a clean and quick break-in.
Phillips Meets Industry Standards
- Meets FAA requirements
- Meets these engine manufacturers requirements:
- Avco Lycoming Material Specification No. 301G
- Pratt & Whitney Bulletin #1183 “U“
- Teledyne Continental Material Specification MHS-24B
- Passes major aircraft engine manufacturers 150 hour type tests
- Meets military specification MIL-L-22851-D (obsolete) for additive treatments (X/C and Type A)
- QPL-J1899
- DO7L1 – 50 (Type A)
- DO7L1 – 60 (Type A)
- D07L1 – 20W-50 (X/C)
- D07L1 – 25W-60 (X/C)
Typical Properties:
Values are representitive of current production
Product Code | 48070 |
SAE Grade | 60 |
API Gravity | 28.4 |
Flash Point, COC, C (F) | 264 (507) |
Fire Point, C (F) | 289 (552) |
Pour Point, C (F) | -30 (-22) |
cSt @40 C | 249 |
cSt @ 100 C | 23.07 |
Viscosity Index | 114 |
Trace Ash, % | Nil |
Neutralization Number | <0.05 |
Foam Test | Pass |
Copper Corrosion | Pass |